PSB gate valve - HPA

pressure seal bonnet(PSB),Rising stem,Outside Screw and Yoke(OS&Y);Metallic or soft seating surfaces,Wedged gate,Parallel gate;Integral,Threaded or welded seat ring.Pressure seal bonnet gate valve,Pressure Sealing Gate Valve.baryè soupap.válvula de Compuerta.Flexible Taper Wedge

Design of Disc
Gate valves with NPS >2 are of flexible wedge gate;
Gate valves with NPS <2 are of solid wedge gate.
Body and Bonnet Connection(Pressure Sealing Gate Valve)
The body and bonnet of Class 150~Class 900 gate valves are usually bolted bonnet design. And Class 1500~Class 2500 gate valves are usually of pressurized seal design.HP/HT Pressure Seal & Bolted Bonnet Valves
Gasket of Cover Flange
Carbon steel or stainless steel+ flexible graphite combined gasket is used for Class 150 gate valve；Stainless steel+ flexible graphite wounded gasket is used for Class 300 gate valve; Stainless steel+ flexible graphite wounded gasket is used for Class 600 gate valve, and ring joint gasket is also optional for Class 600 gate valve; Ring Joint gasket is used for Class 900 gate valve; Pressurized seal design is used for Class 1500~Class 2500 gate valve.
Packing Seal
Molded flexible graphite is used for packing material .PTFE or combined packing material can be also used if being requested by the customers .The internal surface of the stuffing box, of which area is contacted with the packing, is of excellent finish (Ra 3.2um).The stem surface, contacting with the packing, should be rolled and pressed after being precisely machined, so as to reach to the high finish and compactness (Ra 0.8um) and ensure the reliable tightness of the stem area.
Belleville Spring Loaded Packing Impacting System
If being requested by the customer ,the Belleville spring loaded packing impacting system can be adopted for enhancing the durability and reliability of the packing seal.
Back Seating Design
All our gate valves have the back seating design. In most cases, the carbon steel gate valve is fitted with a renewable back seat. For stainless steel gate valve, the back seat is machined directly in the bonnet or is machined after welding .When the gate valve is at fully open position, the sealing of the back seat can be very reliable .However, as per the requirement of API600, it is not advisable to add or change packing by the mean of back seating when the valve is pressure containing.
Seat
For carbon steel gate valve, the seat is usually forged steel. The sealing surface of the seat is spray welded with hard alloy specified by the customer. Welded seat is used for NPS<10 gate valves, and welded on seat can be also optional if being requested by the customer. Welded on seat is used for NPS<10 carbon steel gate valves .for Stainless steel gate valve, integral seat is usually adopted, or to weld hard alloy directly integrally. Threaded or welded on seat is also optional for stainless steel gate valve if being requested by the customer.
Stem Design
The stem is of integral forged design .The minimum diameter of the stem shall per the standard requirement .The connection of the stem and disc is T type .The strength of the connecting area is bigger than that of the T threaded part of the stem .
Stem Nut
Usually, the stem nut is made of ASTM A439 D2.It is also can be made of copper alloy if being requested by the customer .For large sized gate valves (NPS 10 for Class 150, NPS 8 for Class 300, NPS 6 for Class 600,NPS 5 for Class 900),rolling bearing is fitted at the two sides of the stem nut in order to minimize the open and close torque of the gate valve.
Special Gate Valve
Besides the common gate valves ,We can also makes cryogenic gate valve, Jacketed Gate Valve, Bellow Sealed Gate Valve, Extension Stem Gate Valve for underground application, Flat Gate Valve, etc.Water seal gate valve.By-Pass and Drain Connections，Indicator and Locking Devices.
Operation type
Handwheel,Gear, Electric actuator,Pneumatic actuator,Bare stem
Standard
Design and Manufacture: API 6D,API600,API603,ISO10434,BS1414 or ASME B16.34
Inspection and Test: API 598/API 6D
End flange dimension: ASME B16.5,ASME B16.47(API 605 ,MSS SP44)
Bute ends dimension: ASME B16.25(BW)
Face to face,end to end: ASME B16.10
Pressure-temperature ratings: ASME B16.34
NACE: NACE 0175
Material
ASTM A216 WCB WCC;ASTM A217 WC1 WC6 WC9;ASTM A351 CF8,A351 CF8M,
A351 CF3,A351 CF3M,A351 CN7M;.ASTM A352 LC1 LCB LCC LC3 or by customers 
(Cast Steel, Alloy Steel, Stainless Steel, Special Steel)
(Keywords:valves,gate valve,valve,API gate valve,wedge gate valve,Sluice valve.Brake valve,Discharge gate,Conduit Gate Valve,Gate valve API 6D,Pressure seal bonnet,Rising Stem Gate Valve,pressure bonnet gate valves,PSB gate valves)Sowa kluczowe:zawory,Zasuwy,zawory,API brama zawór,zasuwa klinowa,luza valve.Brake zawór toczny brama,Conduit Zasuwy,Zasuwy API 6D,maski uszczelnienie cinieniowe,Rising Zasuwa Mostek, zawory cinieniowe maski bramy,Zasuwy PSB).  kleppen,poort,klep,API schuifafsluiter,wig schuifafsluiter,Sluis valve.Brake klep,Discharge poort,Conduit Gate Valve,Afsluitschuif API 6D, Drukafdichting motorkap,Rising Stem Gate Valve,de druk motorkap schuifafsluiters,PSB schuifafsluiters)comhlaí,comhla geata,comhla,API comhla geata,comhla geata ding,Chomhla valve.Brake comhla,Scaoilte geata,Seoladán Geata comhla,Geata comhla API 6D, bhoinéid séala Bhrú,irí Amach comhla Geata gas, comhlaí geata brú boinéad,na comhlaí geata PSB)ventili,vrata ventil,ventil,API vrata ventil,klin vrata ventil,zaporni ventil valve.Brake, Discharge vrata,Conduit Gate Valve,Zaporni zasun API 6D,tlaka peat poklopac motora,Rising Matine vrata ventila,poklopac motora tlak zasuni,psb zasuniventiler,backventil,ventil,API backventil,kil backventil,Sluice valve.Brake ventil,Discharge grind,Conduit Gate Valve,Sprrventil API 6D, tryckfrsegling motorhuv,Rising Stem Gate Valve, tryck motorhuven gate ventiler,PSB slussventilerventii,vārstu,vārsta, API vārti vārsts,īlis vārti vārsts,slūām valve.Brake vārstu,izplūdes vārsts,Conduit Gate Valve,vārti vārsts API 6D,spiediena zīmogs pārsegs,Rising Stublājs Gate Valve,spiediena motora aizbīdi,PSB aizbīdi votuvai,Sklends,votuvas,API Sklends, pleito vartai votuvas,liuzo valve.Brake votuvas,biudeto vykdymo patvirtinimas vartai, Vamzdi Sklends,Sklends API 6D,slgio plomba variklio dangio,prisiklimo Kamienini Sklends, variklio dangtis slgio sklends,PSB vart votuvai)kleppe,sluisklep,klep,API sluisklep,wig sluisklep, sluis valve.Brake klep,Discharge hek,Conduit Gate Valve,sluisklep API 6D,druk sel enjinkap, Rising Stem Gate Valve,druk enjinkap hek kleppe,PSB hek kleppe)pressure bonnet gate valve,PSB gate valve,PSB API 6D gate valve,válvula de gaveta,gate ventil distributer,schuifafsluiter distributeur,ift disk vanas,Robinete cu sertar pana,Robinete cu sertar pana,corp cu capete pentru sudura si by-pass,actionate electric cu servomotor si reductor intermediar,Gate valves, body welding ends and bypass electrically operated actuator and gearbox with intermediate,dublu disc poarta ventil,Three Way Gate Valves,3 Way Gate Valves Department.pressure seal valves,Cast iron gate valve with gear ,Шибър клинов чугунен,gate valves for high pressure,Parallel Slide Pressure Seal Gate Valve,ASME-Keilrundschieber nach API600 mit Flanschen,Pressure seal Gate valves,Zasuwy klinowe,double disc gate valve,double disk & parallel slide,30ч925бр,Válvulas de Compuerta,Ворота клапанVan cng,Van ca,Válvula Globe PressureSeal,Válvula Gaveta Pressure Seal, .Zasuwy klinowe,ībertipa aizbīdibaryè soupapválvula de gaveta,Vanne de sectionnement à opercule.válvulas esclusa.oupátka.oupátka.Енергетична арматура.Turbine Bypass Valves,Válvula Globo Pressure SealVálvula Gaveta Pressure Seal ZGVPDouble expanding through conduit gate valve válvula de Compuerta Flexible Taper Wedge Our parallel seated gate valve :Excellent tightness provided by the double disc with ball and socket design ; full bore Free expansion discs to avoid seizing caused by temperature variations  Parallel seated gate valve