API /ANSI /BS Valves.Side Entry trunnion Ball ValveTop Entry Ball ValveMetal Seat Ball ValveFull Welded Ball ValveThrough Conduit Gate Valve6D Swing Check ValveLubricated Plug ValveForged Steel Gate ValveForged Steel Globe ValveForged Steel Check ValveTriple eccentric butterfly valve AB43Double offset butterfly valvesAPI 600 Gate ValveAPI600 Globe ValveSwing Check ValveWafer Check ValveExpanding Plug ValveFloating Ball ValveSmall Ball ValvesDBB ValvesY StrainerBasket StrainerRising Stem Ball ValveAxial flow check valveLift Check ValveTilting disc check valveSafety Relief Valve Extraction check valve quick close3 way ball valve L or T portPig ValveCryogenic butterfly valve for LNGPressure seal swing check valvePressure seal gate valveDIN/EN/GOST Valves.Other Valves & Fittings.
news

Forged check valve - HPA-E

Back To List  

Description:API 602 check valve. 
body:A105   trim:13Cr. Seat:13Cr

 

Forged Lift check valve,API602_check_valvematerial:ASTM A105NPS:2"Quantit: 500PCS
Export country:USAYear:2011EndS: NPT and SW
Forged Steel Check Valve
Features
1. Forged Steel,Outside Screw and Yoke,Rising Stem 
2. Non-Rising Handwheel,Integral Backseat
3. Solid Wedge,Renewable Seat Rings,Sprial Wound Gaske
4. Reduced Bore or FullPort 
5. Socket Welded,Threaded,Butt Welded,Flanged End 
Standard
Design and manufacture to API 602,ASME B16.34,BS 5352
Face to face to API 6D or ASME B 16.10
Flange Ends to ASME B16.5 
Test and Inspection to API 6D or API 598

Y-pattern Piston Check Valve
Features
1. Size: 1/2"-2"
2. Pressure: 150LB-2500LB   
3. Material: A105, A182 Gr.F304, A182 Gr.F316, A182 Gr.F304L, A182 Gr.F316L,A182 Gr.F11, A182 Gr.F22,A350 Gr.LF2, F51 
Standard
Design and manufacture to API 602 ,BS5352
Face to face to API B16.10
Flange Ends to ASME B16.5, ASME B16.11, ASME B1.20.1
Test and Inspection to API 598 

Pressure Sealing Swing Check Valve
Features
1. Available to API 6A design, RTJ flanged ends, 3000, 5000 and 10,000 PSI working pressure 
2. Design to ANSI B16.34, pressure seal bonnet, Cast and forged construction available 
3. Butt weld ends to ANSI B16.25 
4. Long pattern dimensions available on request 
5. Seal welded seat ring construction 
Standard
Design and manufacture to API 6A,ASME B16.34,BS 5352 
Face to face to API 6D or ASME B 16.10
Flange Ends to ANSI B16.25 
Test and Inspection to API 6D or API 598 
Ausführung:   metallisch-dichtend   steigende Spindel   nichtsteigendes Handrad   Werkstoffe:   Gehuse und Haube in P250GH   Gehuse- und Keilsitze in 1.4021   Spindel in 1.4006       Flanschanschluss: / Baulnge:   DIN EN 1092-1 Form B1   Baulnge DIN EN 558-1    PN 40 in DN 15 - 40  Grundreihe 1   PN 40 in DN 50 Grundreihe 26  
 Weitere Ausführung:   mit Kettenrad   mit Antrieb   mit TA-Luft       Andere Ausführung auf Anfrage. 

Ventiler Butterflyventil Fedtsmurt hane Gastrykregulator Kontra ventil Kuglehane Magnetventil Motorventil Multi-blok Pneumatisk ventil ReguleringsventilReguleringsklap Sikkerhedsafbl.ventil Sikkerhedsafsp.ventil Sikkerhedsventil Skydeventil Spadeventil Sdeventil