API /ANSI /BS Valves.Side Entry trunnion Ball ValveTop Entry Ball ValveMetal Seat Ball ValveFull Welded Ball ValveThrough Conduit Gate Valve6D Swing Check ValveLubricated Plug ValveForged Steel Gate ValveForged Steel Globe ValveForged Steel Check ValveTriple eccentric butterfly valve AB43Double offset butterfly valvesAPI 600 Gate ValveAPI600 Globe ValveSwing Check ValveWafer Check ValveExpanding Plug ValveFloating Ball ValveSmall Ball ValvesDBB ValvesY StrainerBasket StrainerRising Stem Ball ValveAxial flow check valveLift Check ValveTilting disc check valveSafety Relief Valve Extraction check valve quick close3 way ball valve L or T portPig ValveCryogenic butterfly valve for LNGPressure seal swing check valvePressure seal gate valveDIN/EN/GOST Valves.Other Valves & Fittings.
news

API 6D ball valve - HPA-E

Back To List  

Forged steel trunnion mounted ball valve,API 6D Ball valve.forged_ball_valve
Features
1. Three pieces design for forged body
2. Fire-safe, antistatic and blow-out proof stem functions
3. Up stream sealing
4. Self relieving seat
5. Double block and bleed(DBB) function
6. Emergency sealant injection system
7. Stem/bonnet extension for cryogenic service 
8. Size : DN150~DN1200(6"-48") 
9. Pressure: Class150~Class2500 

Standard
Design and manufacture to API 6D, BS 5351, API 608
Face to face to API 6D or ASME B 16.10
Flange Ends to B 16.5
Test and Inspection to API 6D or API 598

Cast steel trunnion mounted ball valve
Features
1. Two or three pieces design for casting body
2. Fire-safe, antistatic and blow-out proof stem functions
3. Up stream sealing
4. Self relieving seat
5. Double block and bleed(DBB) function
6. Emergency sealant injection system
7. Stem/bonnet extension for cryogenic service
8. Size : DN150~DN1400(6"-56") 
9. Pressure: Class150~Class600 

Standard
Design and manufacture to API 6D, BS 5351, API 608
Face to face to API 6D or ASME B 16.10
Flange Ends to B 16.5
Test and Inspection to API 6D or API 598

Top Entry Ball Valve
Features
1. One piece body design
2. Fire-safe & antistatic 
3. In-line repair
4. Less leakage path compared to side entry design
5. Double block and bleed(DBB) function
6. Emergency sealant injection system
7. Stem/bonnet extension for cryogenic service

Standard
Design and manufacture to API 6D, BS 5351, API 608
Face to face to API 6D or ASME B 16.10
Flange Ends to B 16.5
Test and Inspection to API 6D or API 598 
KURKI KULOWE. ARMATURA TEFLONOWANA. ELEMENTY RUROCIGW. KURKI STOKOWE. PRZEPUSTNICE. ZASUWY. ZAWORY ZAPOROWE.kurki,kurki kulowe,zawory,zawory kulowe,zawory zwrotne,ball valve,filter,armatura,kurek,kurek kulowy,zawór,zawor,zawór kulowy,zawór zwrotny,filtr,