DIN VALVE STANDARDS
DIN 11832-1 Farm and livestock husbandry equipment; shut-off valves for slurry pipes; gate valves for static pressure of max. 1 bar
DIN 11852 Valves for food and chemical industries - Stainless steel fittings - Tees, bends, reducers for welding-on
DIN 12918-1 Laboratory equipment - Laboratory fittings - Part 1: Valves for water
DIN 12918-2 Laboratory equipment - Laboratory fittings - Part 2: Valves for fuel gases
DIN 12918-3 Laboratory equipment - Laboratory fittings - Part 3: Valves for technical gases
DIN 12918-4 Laboratory equipment - Laboratory fittings - Part 4: Valves for pure gases
DIN 14380 Pressure limitation valve, nominal pressure 16
DIN 14381 Pressure valve type B PN 16, self-locking
DIN 14461-1 Delivery valve installation - Part 1: Hose reel with semi-rigid hose
DIN 14461-2 Delivery valve installation connected with dry rising fire mains; filling station and output station
DIN 14461-3 Delivery valve installations for firefighting purposes - Part 3: Fire hose valves for nominal pressure PN 16
DIN 14461-4 Delivery valve installations connected with dry rising fire mains; filling armaturs PN 16
DIN 14461-5 Delivery valve installations connected with dry rising fire mains; fire hose valve PN 16
DIN 14461-6 Delivery valve installation - Part 6: Dimensions of cabinets and installation of hose reels with lay-flat hoses according to DIN EN 671-2
DIN 14463-3 Water systems for fire extinguishing - Filling and draining devices operated by remote control - Part 3: Valves for ventilation PN 16 of fire extinguishing pipe systems "wet/dry" and "dry"
DIN 16270 PN 250 and PN 400 valves without test connection for pressure gauges
DIN 16271 PN 250 and PN 400 valves with test connection for pressure gauges
DIN 16272 PN 250 and PN 400 valves with shut-off test connection for pressure gauges
DIN 16287 Caps for test connection on valves and cocks for pressure gauges
DIN 20040 Hose fittings; nipple valves; nominal pressure 16
DIN 20042 Watervalve, nominal pressure 40 - Dimensions and requirements
DIN 21556 Mine support; valves for individual props; identification code
DIN 21557 Mine support; yield valves for powered support; identification code
DIN 21635 Air regulation systems in mining - Air locks - Building and operation
DIN 21636-2003 Air regulation systems in mining - Belt-conveyors-way air locks - Dimensions, identifications, requirements and testing
DIN 24311 Hydraulic fluid power; proportional and servo valves; definitions, symbols, units
DIN 24340-2 Hydraulic valves; mounting surfaces and connecting plates for directional control valves
DIN 27205-9State of railway vehicles - Brake - Part 9: Function of driver's brake valve, control devices and indicators in driver's cabs
DIN 28140-1 Connections for bottom discharge valves - Part 1: Non alloyed, stainless or lined steel; dimensions mating PN 10
DIN 28140-2 Connections for bottom discharge valves - Part 2: On glass lined steel; connecting dimensions PN 10
DIN 30690-2 Bb.1 Component parts in the gas installation; requirements on metallic materials for valves being used for gas appliances, notes for selection for materials, strength data
DIN 3160 Through-valves for refrigerant circuits, nominal pressure 25 bar
DIN 3161 Elbow valves for refrigerant circuits; nominal pressure 25 bar
DIN 3162 Screwed caps for valves for refrigerant circuits, nominal pressure 25 bar
DIN 3163 Control through valves for refrigerant circuits, nominal pressure 25 bar
DIN 3164 Position indicator for valves for refrigerant circuits
DIN 3174-1 Respiratory equipment - Cylinder valves - Part 1: Cylinder valves for compressed oxygen
DIN 3174-10 Respiratory equipment; valves for respiratory protective devices; for fire brigades; outer dimensions
DIN 3202-4 Face-to-face and centre-to-face dimensions of valves; Valves with female thread connection
DIN 3202-5 Face-to-face and centre-to-face dimensions of valves; valves for connection with compression couplings
DIN 3223 Handling keys for valves
DIN 3223/A1 Handling keys for valves; Amendment A1
DIN 3227 Valves for potable water supply in buildings - Angle service valves - Requirements and tests
DIN 3230-4 Technical Conditions of Delivery for Valves; Valves for Potable Water Service, Requirements and Testing
DIN 3236-1 Straight pattern valves with flange socket placed in shunt - Part 1: Without lining
DIN 3236-2 Straight pattern valves with flange socket placed in shunt - Part 2: With enamel lining
DIN 3237-1 Straight pattern valves with flange socket in main power connection - Part 1: Without lining
DIN 3237-2 Straight pattern valves with flange socket in main power connection - Part 2: With plastic lining
DIN 3237-3 Straight pattern valves with flange socket in main power connection - Part 3: With rubber lining
DIN 3247 Flanged suction strainers without non-return valve
DIN 3248 Threaded suction strainers without non-return valve
DIN 3249 Threaded suction strainers with non-return valve
DIN 32509 Hand-operated shut-off valves for welding, cutting and allied processes - Type of construction, safety requirements, tests
DIN 3259 Flanged suction strainers with non-return valve
DIN 3267Flushingtubes for flush-valves
DIN 3280 Valves for domestic water supply; tapered unions up to PN 10; survey
DIN 3281 Valves for domestic water supply; tapered union nipples nominal pressure 10; survey
DIN 3283 Valves for domestic water supply; nipples and unions nominal pressure 10; exhaust nipples with internal threads
DIN 3284 Valves for domestic water supply; nipples and unions nominal pressure 10; exhaust nipples with external threads
DIN 3285 Valves for domestic water supply; nipples and unions nominal pressure 10; hose nipples
DIN 3287 Valves for domestic water supply; nipples and unions nominal pressure 10; threaded nipples for tubes
DIN 3289 Valves for domestic water supply; nipples and unions nominal pressure 10; threaded tapered union nipples
DIN 3291 Valves for domestic water supply; nipples and unions nominal pressure 10; threaded hose nipples
DIN 32931 Valves and valve adapters for inflatable recreational articles and toys - Terms and definitions, requirements and testing
DIN 3334 Mixing valves for heating installations with flanges, three way mixing valves, four way mixing valves, ND 6 max. 110 °C; installation dimensions
DIN 3335 Mixing valves for heating installations with screwed ends; three way mixing valves, four way mixing valves, ND 6 max. 110 °C, installation dimensions
DIN 3336 Mixing valves for heating installations with welding neck ends; three way mixing valves, four way mixing valves, ND 6 max. 110 °C, installation dimensions
DIN 3338 Multi-turn valve actuator attachment; dimensions of type C driving components
DIN 3341 Plate valves for displacement compressors; suction valves, discharge valves; main dimensions, materials, installation
DIN 3352-5 Steel gate valves, isomorphe series
DIN 3356-1 Globe valves; General data
DIN 3357-4 Full bore nonferrous metal ball valves
DIN 3357-5 Reduced bore nonferrous metal ball valves
DIN 3358 Linear valve actuator attachment; mating dimensions
DIN 3383-1 Hose assemblies and connection valves for gas; safety hose assemblies, safety valves with quick connecting device
DIN 3394-1 Automatic control valves - Part 1: Pressure relief, safety and regulating valves for pressure above 4 bar up to 16 bar
DIN 3394-3 Automatic control valves - Part 3: Class 0 pressure relief, valves for pressure up to 4 bar
DIN 3399 Gas low-pressure cut-off valves; safety requirements, testing
DIN 3430 Gas valves; angle pattern ball shut-off valves
DIN 3431 Gas valves; angle pattern ball shut-off valves with compression coupling
DIN 3432 Gas valves; straight pattern ball shut-off valves with compression coupling
DIN 3475 Valves and fittings of spheroidal cast iron for untreated and potable water; corrosion protection by internal enamelling; quality requirements, testing
DIN 3476 Valves and fittings for untreated and potable water - Protection against corrosion by internal epoxy coating of coating powders (P) or liquid varnishes (F) - Requirements and tests
DIN 3500 piston type gate valves for use in drinking water supply systems
DIN 3502 Stopvalves for domestic water supply - Two-way valves - Oblique bonnet type PN 10; Y-type valve; Technical rule of the DVGW
DIN 3509 Valves for water supply dimensional characteristics; taps PN 10
DIN 3512 Stopvalves for domestic water supply - Two-way valves - Vertical bonnet type PN 10; Straight pattern globe valve; Technical rule of the DVGW
DIN 3528 Valves for gas installations; nozzles with gasket
DIN 3529 Valves for gas installations; straight pattern stop cocks female threaded ends
DIN 3532 Valves for gas installations; angle pattern stop cocks
DIN 3533 Valves for gas installations; angle pattern stop cocks with compression fitting
DIN 3534 Valves for gas installations; straight pattern taps with compression fitting
DIN 3535-1 Sealants for gas supplies; elastomeric gasket materials for gas valves in domestic installations; requirements and tests
DIN 3535-6 Gaskets for gas supply - Part 6: Gasket materials based on synthetic fibres, graphite or polytetrafluoroethylen (PTFE) for gas valves, gas appliances and gas mains
DIN 3536 Lubricants for gas valves in indoor installation, gas distribution, and gas transportation pipe lines
DIN 3538 Valves for gas installations; butterfly valves; female threaded ends
DIN 3543-1 Metal tapping valves; requirements, testing
DIN 3543-2 Metallic tapping stop valves; dimensions
DIN 3543-3 PVC tapping valves for plastic pipes; dimensions
DIN 3543-4 High density polyethylene (HDPE) tapping valves for HDPE pipes; dimensions
DIN 3546-1 Stopvalves for domestic water supply - Part 1: General requirements and tests for manually operated piston type gate valves, stopvalves for tapping valves, gate valves and diaphragm valves; Technical rule of the DVGW
DIN 3548-1 Flanged steam traps
DIN 3581 Gas pipelines; size 1 valve box
DIN 3582 Gas pipelines; size 2 valve box
DIN 3583 Gas pipelines; size 3 valve box
DIN 3584 Gas pipelines; size 4 valve box
DIN 3585 Gas pipelines; size 5 valve box
DIN 3842 Valves for heating installations, PN 10; dimensions, materials, design
DIN 3844 Valves for heating installations; copper alloy globe valves PN 16 with screwed sockets; dimensions, materials
DIN 3848 Valves for heating installations; filling and evacuating taps PN 12.5; dimensions, materials
DIN 3852-1 Stud ends, ports, for fittings, valves - Part 1: Plug screw with metric fine pitch thread; General outlay of types
DIN 3852-11 Screwed stud-ends; tapped holes; for compression fittings, valves, screw plugs, screwed stud-ends type E; design dimensions
DIN 3852-2 Stud ends, ports, for fittings, valves - Plug screw with Whitworth pipe thread - General outlay of types
DIN 4000-13 Tabular layouts of article characteristics for valves
DIN 4055 Water pipelines; valve box for underground hydrants; DVGW code of practice
DIN 4056 Water pipelines; valve boxes for stop valves; DVGW code of practice
DIN 4057 Water pipelines; valve box for tapping valves; DVGW code of practice
DIN 40741-1 Lead-acid batteries - Stationary valve regulated batteries with positive grid plates and immobilized electrolyte for industrial application - Rated capacities, main dimensions, weights
DIN 42568 Transformers; outlet valve DN 15 and DN 32 for sampling and discharge
DIN 43689 Shut-off valves 40 (570 psig) and 64 (911 psig) for compressed-air installations in electrical switching plants
DIN 45635-50 Measurement of noise emitted by machines; airborne noise measurement, enveloping surface method; valves
DIN 475-1 Widths across flats for bolts, screws, valves and fittings
DIN 477-4 Compressed gas cylinder valves; swing check valves for camping-cylinders
DIN 477-5 Gas cylinder valves - Part 5: For test pressure up to 450 bar max.; Outlet connections
DIN 4817-1 Shut off valves for liquefied gases; definitions, requirement, testing, marking
DIN 5589 Compressed air equipment for rail vehicles; safety valves; mounting and connecting dimensions, requirements
DIN 5593-1994 Compressed air equipment for rail vehicles - Check valves - Installation and companion dimensions
DIN 5594 Compressed air equipment for rail vehicles - Double check valves - Installation and companion dimensions
DIN 58362-7 Infusion - Infusion equipment and accessories - Part 7: Check valves
DIN 58600 Respiratory protective devices - Plug-in connection between lung governed demand valve and facepiece for self-contained open-circuit compressed air breathing apparatus for use by German fire brigade
DIN 6273 Internal combustion engines; indicator valves
DIN 6274 Internal combustion engines for general purposes; Compressed air containers with valve block; 38 mm bore; Assembly
DIN 6276 Internal combustion engines for general purposes; Valve blocks for compressed air containers; 38 mm bore
DIN 71401-1 Drain cocks for internal combustion engines; not to be used for new designs
DIN 73368 Overflow valves and hollow screw for fuel injection devices
DIN 74279 Air braking systems - Charging valves
DIN 74280 Air braking systems - Check valve
DIN 74341 Air braking systems; shuttle valve with backflow
DIN 7786 Tube valves; swivel type tyre valve, single bend form
DIN 78026 Valves for tubeless tyres; metal base type for air-waterfilling
DIN 85003-1 Technical specifications for valves for shipboard use - Part 1: General
DIN 85003-2 Technical specifications for valves for shipboard use - Part 2: Survey of possible requirements and methods of test
DIN 85003-3 Technical specifications for valves for shipboard use - Part 3: Butterfly valves
DIN 85003-4 Technical specifications for valves for shipboard use - Part 4: Stop valves
DIN 85003-5 Technical specifications for valves for shipboard use - Part 5: Cutt off type non return valves
DIN 85003-6 Technical specifications for valves for shipboard use - Part 6: Hand operated gate valves
DIN 85003-7 Technical specifications for valves for shipboard use - Part 7: Diaphragm valves
DIN 85003-8 Technical specifications for valves for shipboard use - Part 8: Ball valves
DIN 86066 Cast steel welding elbows for storm valves - DN 50 to 150, connecting dimensions according to PN 10
DIN 86211 Fire valves for PN 16, with fire hose couplings type C or B and with flange connection
DIN 86251 Shutt off valves for shipboard use, of cast iron, with flanges, DN 15 to 500
DIN 86252 Non return valves for shipboard use, cutt off type, of cast iron, with flanges, DN 15 to 500
DIN 86259 Ships and marine technology - Flanged gate valves extra light duty DN 32 to DN 125, PN 10
DIN 86260 Shutt off valves for shipboard use, of gun metall, with flanges, DN 15 to 500
DIN 86261 Non return valves for shipboard use, cutt off type, of gun metall, with flanges, DN 15 to 500
DIN 86263 Straight way valves for shipboard use - Y-patten, soft sealing, with socket connection - DN 15 to DN 50, PN 16
DIN 86264 Straight way valves for shipboard use - Y-patten, soft sealing, short type with flanges - DN 15 to DN 200
DIN 86265 Straight way valves for shipboard use - Y-patten, soft sealing, normal type, with flanges - DN 15 to DN 200
DIN 86501 Valves, screwed bonnet type of gun metal with 24°-connection with port end W according to DIN 3861
DIN 86528 Tab washers for screwed bonnet valves
DIN 86552 Valves, screwed bonnet type of steel with 24°-connection with port end W according to DIN 3861
DIN 86720 Gate valves flat sided of gun metall with screwed bonnet and flanges, DN 20 to DN 100, PN 16
DIN 87101 Non-return flaps (storm valves), self-closing, vertical type, DN 50 up to DN 150, PN 1 - Mating dimensions for flanges according to PN 10
DIN 87303 Squares with tapered and parallel sides for valves for shipboard use
DIN 87308 Operating devices for valves for shipboard use - Crank handles with square hole with tapered sides
DIN 87901 Sniffle valves for pumps
DIN 8905-3-1983 Tubes for refrigerating systems with hermetic and semi-hermetic compressors; additional technical delivery conditions for capillary restrictor tubes
DIN EN 10090 Valve steels and alloys for internal combustion engines
DIN EN 1074-1 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1: General requirements
DIN EN 1074-2 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 2: Isolating valves
DIN EN 1074-3 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 3: Check valves
DIN EN 1074-4 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 4: Air valves
DIN EN 1074-5 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5: Control valves
DIN EN 1074-6 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 6: Hydrants
DIN EN 1092-1 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories - Part 1: Steel flanges, PN designated
DIN EN 1092-3 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges
DIN EN 1092-4 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges
DIN EN 1111 Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification
DIN EN 1171 Industrial valves - Cast iron gate valves
DIN EN 12050-4 Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter
DIN EN 12094-13 Fixed firefighting systems - Components for gas extinguishing systems - Part 13: Requirements and test methods for check valves and non-return valves
DIN EN 12094-4 Fixed firefighting systems - Components for gas extinguishing systems - Part 4: Requirements and test methods for container valve assemblies and their actuators; German version EN 12094-4 Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators
DIN EN 12100 Plastics piping systems - Polyethylene (PE) valves - Test method for the resistance to bending between supports
DIN EN 12107 Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components
DIN EN 12117 Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships
DIN EN 1213 Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements
DIN EN 12201-4 Plastics piping systems for water supply - Polyethylene (PE) - Part 4: Valves;
DIN EN 12259-2 Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2: Wet alarm valve assemblies
DIN EN 12259-2/A2 Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2: Wet alarm valve assemblies
DIN EN 12259-3 Fixed firefighting systems - Components for sprinkler and water spray systems - Part 3: Dry alarm valve assemblies
DIN EN 12259-3/A2 Fixed firefighting systems - Components for sprinkler and water spray systems - Part 3: Dry alarm valve assemblies; German version
DIN EN 12266-1 Industrial valves - Testing of valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
DIN EN 12266-2 Industrial valves - Testing of valves - Part 2: Tests, test procedures and acceptance criteria; Supplementary requirements
DIN EN 12284 Refrigerating systems and heat pumps - Valves - Requirements, testing and marking
DIN EN 12288 Industrial valves - Copper alloy gate valves
DIN EN 12334 Industrial valves - Cast iron check valves
DIN EN 12351 Industrial valves - Protective caps for valves with flanged connections
DIN EN 12380 Air admittance valves for drainage systems - Requirements, test methods and evaluation of conformity
DIN EN 12514-2 Installations for oil supply systems for oil burners - Part 2: Safety requirements and tests; parts, valves pipes, filters, oil de-aerators, meters
DIN EN 12516-1 Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells
DIN EN 12516-2 Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells
DIN EN 12516-3 Valves - Shell design strength - Part 3: Experimental method
DIN EN 12541 Sanitary tapware - Pressure flushing valves and automatic closing urinal valves PN 10
DIN EN 12567 Industrial valves - Isolating valves for LNG - Specification for suitability and appropriate verification tests
DIN EN 12569 Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests
DIN EN 12570 Industrial valves - Method for sizing the operating element
DIN EN 12627 Industrial valves - Butt welding ends for steel valves
DIN EN 1267 Valves - Test of flow resistance using water as test fluid
DIN EN 12760 Valves - Socket welding ends for steel valves
DIN EN 1286 Sanitary tapware - Low pressure mechanical mixing valves; general technical specification
DIN EN 1287 Sanitary tapware - Low pressure thermostatic mixing valves; general technical specification
DIN EN 12982 Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves
DIN EN 13082 Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve
DIN EN 13152 Specification and testing of LPG cylinder valves - Self closing
DIN EN 13153 Specification and testing for liquefied petroleum gas (LPG) cylinder valves - Manually operated
DIN EN 13175 Specification and testing for Liquefied Petroleum Gas (LPG) tank valves and fittings;
DIN EN 13244-4 Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 4: Valves
DIN EN 13308 Tanks for transport of dangerous goods - Service equipment for tanks - Non pressure balanced footvalve
DIN EN 13312-5 Biotechnology - Performance criteria for piping and instrumentation
DIN EN 13316 Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve
DIN EN 13397 Industrial valves - Diaphragm valves made of metallic materials
DIN EN 1349 Industrial process control valves
DIN EN 13617-3 Petrol filling stations - Part 3: Safety requirements for construction and performance of shear valves; German version EN 13617-3:2004
DIN EN 13648-1 Cryogenic vessels - Safety devices for protection against excessive pressure - Part 1: Safety valves for cryogenic service
DIN EN 13709 Industrial valves - Steel globe and globe stop and check valves
DIN EN 13774-2003 Valves for gas distribution systems with maximum operating pressure 16 bar - Performance requirements
DIN EN 13786 Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures
DIN EN 13789 Industrial valves - Cast iron globe valves
DIN EN 13792 Colour coding of taps and valves for use in laboratories
DIN EN 13828 Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings - Tests and requirements
DIN EN 13942 Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves
DIN EN 13953-2003 Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)
DIN EN 13959 Anti-pollution check valves - DN 6 to DN 250 inclusive - Family E, type A, B, C and D;
DIN EN 14071 Pressure relief valves for LPG tanks - Ancillary equipment
DIN EN 14124 Inlet valves for flushing cisterns with internal overflow
DIN EN 14129 Pressure relief valves for LPG tanks
DIN EN 14141 Valves for natural gas transportation in pipelines - Performance requirements and tests
DIN EN 14189 Transportable gas cylinders - Inspection and maintenance of cylinder valves at time of periodic inspection of gas cylinders
DIN EN 144-1 Respiratory protective devices - Gas cylinder valves - Part 1: Thread connections for insert connector
DIN EN 144-2 Respiratory protective devices - Gas cylinder valves - Part 2: Outlet connections
DIN EN 144-3 Respiratory protective devices - Gas cylinder valves - Part 3: Outlet connections for diving gases Nitrox and oxygen
DIN EN 14432 Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Product discharge and air inlet valves
DIN EN 14433 Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Foot valves
DIN EN 14451 Devices to prevent pollution by backflow of potable water - In-line anti-vacuum valves DN 8 to DN 80 - Family D, type A
DIN EN 14455 Devices to prevent pollution by backflow of potable water - Pressurised air inlet valves DN 15 to DN 50 - Family L, type A and type B
DIN EN 1452-4 Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4: Valves and ancillary equipment
DIN EN 14529 Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only
DIN EN 14593-1 Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Part 1: Apparatus with a full face mask - Requirements, testing, marking
DIN EN 14593-2 Berichtigung 1 n Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Part 2: Apparatus with a half mask at positive pressure - Requirements, testing
DIN EN 14593-2 Respiratory protective devices - Compressed air line breathing with demand valve - Part 2: Apparatus with a half mask at positive pressure - Requirements, testing, marking
DIN EN 14596 Tanks for transport of dangerous goods - Service equipment for tanks - Emergency pressure relief valve
DIN EN 14848 Aerosol containers - Metal containers with 25,4 mm aperture - Dimensions of valve cups
DIN EN 14849 Aerosol containers - Glass containers - Dimensions of aerosol valve ferrules
DIN EN 1487 Building valves - Hydaulic safety groups - Tests and requirements
DIN EN 1488 Building valves - Expansion groups - Tests and requirements
DIN EN 1489 Building valves - Pressure safety valves - Tests and requirements
DIN EN 1490 Building valves - Combined temperature and pressure relief valves - Tests and requirements
DIN EN 1491 Building valves - Expansions valves - Tests and requirements
DIN EN 14912 LPG equipment and accessories - Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders
DIN EN 1503-1 Valves - Materials for bodies, bonnets and covers - Part 1: Steels specified in European standards
DIN EN 1503-2 Valves - Materials for bodies, bonnets and covers - Part 2: Steels other than those specified
DIN EN 1503-3 Valves - Materials for bodies, bonnets and covers - Part 3: Cast irons specified in European standards
DIN EN 1503-4 Valves - Materials for bodies, bonnets and covers - Part 4: Copper alloys specified in European Standards
DIN EN 1555-4 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves
DIN EN 1567 Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests
DIN EN 161-2002 Automatic shut-off valves for gas burners and gas appliances
DIN EN 1626 Cryogenic vessels - Valves for cryogenic service
DIN EN 1643 Valve proving systems for automatic shut-off valves for gas burners and gas appliances
DIN EN 1680 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism
DIN EN 1704 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending
DIN EN 1705 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow
DIN EN 1759-1 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
DIN EN 1759-3 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 3: Copper alloy flanges
DIN EN 1759-4 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 4: Aluminium alloy flanges
DIN EN 1827 Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking
DIN EN 19 Industrial valves - Marking of metallic valves
DIN EN 1964-2 Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres - Part 2: Cylinders made of seamless steel with an R<(Index)m> value of 1100 MPa and above
DIN EN 1983 Industrial valves - Steel ball valves
DIN EN 1984 Industrial valves - Steel gate valves
DIN EN 200 Sanitary tapware - Single taps and combination taps (PN 10) - General technical specification
DIN EN 215 Thermostatic radiator valves - Requirements and test methods
DIN EN 26554 Flanged automatic steam traps; face-to-face dimensions
DIN EN 26704 Automatic steam traps; classification
DIN EN 26948 Automatic steam traps; production and performance characteristic tests
DIN EN 27841 Automatic steam traps; determination of steam loss; test methods
DIN EN 27842 Automatic steam traps; determination of discharge capacity; test methods
DIN EN 28233 Thermoplastics valves; torques; test method
DIN EN 28659 Thermoplastic valves; fatigue strength; test method
DIN EN 331 Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
DIN EN 405 Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking
DIN EN 417 Non-refillable metallic cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances - Construction, inspection, testing and marking
DIN EN 45510-7-1 Guide for procurement of power station plant, equipment and systems - Part 7-1: Pipework and valves; high pressure piping systems
DIN EN 45510-7-2 Guide for procurement of power station plant, equipment and systems - Part 7-2: Pipework and valves; boiler and high pressure piping valves
DIN EN 488 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
DIN EN 50216-8 Power transformer and reactor fittings - Part 8: Butterfly valves for insulating liquid circuits
DIN EN 558-1 Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - Part 1: PN-designated valves
DIN EN 558-2 Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - Part 2: Class-designated valves
DIN EN 561 Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes
DIN EN 593 Industrial valves - Metallic butterfly valves; German version EN 593:2004
DIN EN 60534-1 Industrial-process control valves - Part 1: Control valve terminology and general considerations
DIN EN 60534-2-1 Industrial-process control valves - Part 2-1: Flow capacity; sizing equations for fluid flow under installed conditions
DIN EN 60534-2-3 Industrial-process control valves - Part 2-3: Flow capacity; test procedures
DIN EN 60534-2-5 Industrial process control valves - Part 2-5: Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery
DIN EN 60534-3-1-2000 Industrial-process control valves - Part 3-1: Dimensions; Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves
DIN EN 60534-3-2 Industrial-process control valves - Part 3-2: Dimensions; Face-to-face dimensions for rotary control valves except butterfly valves
DIN EN 60534-3-3 Industrial-process control valves - Part 3-3: Dimensions - end-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves
DIN EN 60534-5 Industrial-process control valves
DIN EN 60534-6-1 Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Postioner mounting on linear actuators
DIN EN 60534-6-2 Industrial-process control valves - Part 6-2: Mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators
DIN EN 60534-8-1 Industrial-process control valves - Part 8-1: Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves
DIN EN 60534-8-2 Industrial-process control valves; part 8: noise considerations; section 2: laboratory measurement of noise generated by hydrodynamic flow through control valves
DIN EN 60534-8-3 Industrial-process control valves - Part 8-3: Noise considerations; Control valve aerodynamic noise prediction method
DIN EN 60534-8-4 Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow
DIN EN 60700-1 Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing
DIN EN 60730-2-19 Automatic electrical controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements
DIN EN 60730-2-19/A11 Automatic electrical controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements
DIN EN 60730-2-8 Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements
DIN EN 60896-21 Stationary lead-acid batteries - Part 21: Valve regulated types
DIN EN 60896-22 Stationary lead-acid batteries - Part 22: Valve regulated types
DIN EN 61056-1 General purpose lead-acid batteries (valve-regulated types) - Part 1: General requirements, functional characteristics; Methods of test
DIN EN 61056-2 General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking
DIN EN 61514-2 Industrial process control systems - Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs
DIN EN 61514 EN 61514:2002 Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs
DIN EN 61954 Power electronics for electrical transmission and distribution systems - Testing of thyristor valves for static VAR compensators
DIN EN 629-1 Transportable gas cylinders - 25E taper thread for connection of valves to gas cylinders
DIN EN 629-2 Transportable gas cylinders - 25E taper thread for connection of valves to gas cylinders - Part 2: Gauge inspection
DIN EN 736-2 Valves - Terminology - Part 2: Definition of components of valves
DIN EN 736-3 Valves - Terminology - Part 3: Definition of terms
DIN EN 816 Sanitary tapware - Automatic shut-off valves PN 10
DIN EN 917 Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness
DIN EN 962 Transportable gas cylinders - Valve protection caps and valve guards for industrial and medical gas cylinders - Design, construction and tests
DIN EN ISO 10297-2006 Transportable gas cylinders - Cylinder valves - Specification and type testing
DIN EN ISO 10417 Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress
DIN EN ISO 10432 Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment
DIN EN ISO 10434 Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries
DIN EN ISO 10497 Testing of valves - Fire type testing requirements
DIN EN ISO 10524-3 Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves
DIN EN ISO 10692-1 Gas cylinders - Gas cylinder valve connections for use in the microelectronic industry - Part 1: Outlet connections
DIN EN ISO 10692-2 Gas cylinders - Gas cylinder valve connections for use in the microelectronic industry - Part 2: Specification and type testing for valve to cylinder connections
DIN EN ISO 11114-1 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials
DIN EN ISO 11114-2 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials
DIN EN ISO 11114-3 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test in oxygen atmosphere (ISO 11114-3:1997) (including corrigendum AC:1998); German version EN ISO 11114-3 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting metallic materials resistant to hydrogen embrittlement
DIN EN ISO 11116-1 Transportable gas cylinders - Gas cylinders; 17E taper thread for connection of valves to gas cylinders
DIN EN ISO 11116-2 Transportable gas cylinders - Gas cylinders; 17E taper thread for connection of valves to gas cylinders - Part 2: Inspection gauges
DIN EN ISO 12209-1 Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 1: Yoke type connections
DIN EN ISO 12209-2 Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 2: Threaded connections
DIN EN ISO 12209-3 Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 3: Adapter for 230 bar valves
DIN EN ISO 13340 Transportable gas cylinders - Cylinder valves for non-refillable cylinders - Specification and prototype testing
DIN EN ISO 13341 Transportable gas cylinders - Fitting of valves to gas cylinders
DIN EN ISO 13758 Liquefied petroleum gases - Assessment of the dryness of propane - Valve freeze method
DIN EN ISO 14246 Transportable gas cylinders - Gas cylinder valves - Manufacturing tests and inspections
DIN EN ISO 14723 Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves
DIN EN ISO 15245-1 Gas cylinders - Parallel threads for connection of valves to gas cylinders
DIN EN ISO 15245-2 Gas cylinders - Parallel threads for connection of valves to gas cylinders
DIN EN ISO 15364 Ships and marine technology - Pressure/vacuum valves for cargo tanks
DIN EN ISO 15761 Steel gate, glob and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries
DIN EN ISO 15848-1 Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves
DIN EN ISO 15996 Gas cylinders - Residual pressure valves - General requirements and type testing
DIN EN ISO 16135 Industrial valves - Ball valves of thermoplastics materials
DIN EN ISO 16136 Industrial valves - Butterfly valves of thermoplastics materials
DIN EN ISO 16137 Industrial valves - Check valves of thermoplastics materials
DIN EN ISO 16138 Industrial valves - Diaphragm valves of thermoplastics materials
DIN EN ISO 16139 Industrial valves - Gate valves of thermoplastics materials
DIN EN ISO 17292 Metal ball valves for petroleum, petrochemical and allied industries
DIN EN ISO 21787 Industrial valves - Globe valves of thermoplastics materials
DIN EN ISO 407 Small medical gas cylinders - Pin-index yoke-type valve connections
DIN EN ISO 4126-1 Safety devices for protection against excessive pressure - Part 1: Safety valves (ISO 4126-1:2004)
DIN EN ISO 4126-3 Safety devices for protection against exessive pressure - Part 3: Safety valves and bursting disc safety devices in combination
DIN EN ISO 4126-4 Safety devices for protection against excessive pressure - Part 4: Pilot operated safety valves
DIN EN ISO 5135 Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room (ISO 5135:1997)
DIN EN ISO 5210 Industrial valves - Multi-turn valve actuator attachments (ISO 5210:1991)
DIN EN ISO 5211 Industrial valves - Part-turn actuator attachments (ISO 5211:2001)
DIN EN ISO 9093-1 Small craft - Seacocks and through-hull fittings - Part 1: Metallic (ISO 9093-1:1994)
DIN IEC 60534-2-4 Industrial-process control valves; flow capacity; inherent flow characteristics and rangeability
DIN IEC 60534-7 Industrial process control valves; control valve data sheet
DIN IEC 61148 Terminal markings for valve device stacks and assemblies and for power convertor equipment; identical with
DIN ISO 11727 Pneumatic fluid power - Identification of ports and control mechanisms of control valves and other components
DIN ISO 1204 Reciprocating internal combustion engines - Designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on an engine
DIN ISO 12238-2005 Pneumatic fluid power - Directional control valves - Measurement of shifting time
DIN ISO 15407-1 Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Part 1: Mounting interface surfaces without electrical connector
DIN ISO 4010 Calibrating Nozzle, Delay Pintle Type
DIN ISO 5599-1 Pneumatic fluid power - Five-port directional control valves - Part 1: Mounting interface surfaces without electrical connector
DIN ISO 6553 Automatic steam traps; marking
DIN ISO 7368 Hydraulic fluid power; two-port slip-in cartridge valves; cavities
DIN ISO 7967-3 Reciprocating internal combustion engines; vocabulary of components and systems; valves, camshaft drive and actuating mechanisms
DIN V 19259-2-1999 Documentation of devices - Standard data element types with associated classification for valves
DIN V 3838-2003 Valves for heating installations - Detachable connection with outside threaded pipe G 3/4 A and inside cone