BS VALVE STANDARDS
BS 10 Specification for flanges and bolting for pipes, valves, and fittings
BS 1010-2 Specification for draw-off taps and stopvalves for water services (screw-down pattern) - Draw-off taps and above-ground stopvalves
BS 1212-1 Float operated valves - Specification for piston type float operated valves (copper alloy body) (excluding floats)
BS 1212-2 Float operated valves - Specification for diaphragm type float operated valves (copper alloy body) (excluding floats)
BS 1212-3 Float operated valves - Specification for diaphragm type float operated valves (plastics bodied) for cold water services only (excluding floats)
BS 1212-4 Float operated valves - Specification for compact type float operated valves for WC flushing cisterns (including floats)
BS 1552 Specification for open bottomed taper plug valves for 1st, 2nd and 3rd family gases up to 200 mbar
BS 1560-3.2 Circular flanges for pipes, valves and fittings (Class designated) - Steel, cast iron and copper alloy flanges - Specification for cast iron flanges
BS 1655 Specification for flanged automatic control valves for the process control industry (face-to-face dimensions)
BS 1868 Specification for steel check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries
BS 1873 Specification for steel globe and globe stop and check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries
BS 1968 Specification for floats for ballvalves (copper)
BS 2456- Specification for floats (plastics) for float operated valves for cold water services
BS 2767 Specification for manually operated copper alloy valves for radiators
BS 2782-11 Method 1108A Methods of testing plastics - Thermoplastics pipes, fittings and valves - True impact rate (TIR) boundaries of pipes
BS 2782-11 Method 1109A-1989 Methods of testing plastics - Thermoplastics pipes, fittings and valves - Resistance to environmental stress cracking of polyethylene pipes and fittings for non-pressure applications
BS 2782-11 Method 1110 Methods of testing plastics - Thermoplastics pipes, fittings and valves - Tensile properties of dumb-bell specimens from PVC gutter profiles of pipes for non-pressure applications
BS 2782-11 Method 1121B Methods of testing plastics - Thermoplastics pipes, fittings and valves - Thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressures - Metric series
BS 2782-11 Method 1121C Methods of testing plastics - Thermoplastics pipes, fittings and valves - Thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressures - Inch-based series
BS 2782-11 Method 1121H Methods of testing plastics - Thermoplastics pipes, fittings and valves - Thermoplastics pipes for the transport of liquids under pressure - Calculation of head losses
BS 2782-11 Method 1127P Methods of testing plastics - Thermoplastics pipes, fittings and valves - Thermoplastics pipes, for the conveyance of fluids - Resistance to internal pressure - Test method
BS 2782-11 Method 1150B Methods of testing plastics - Thermoplastics pipes, fittings and valves - Plastics pipes and fittings - Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion
BS 2782-11 Method 1150E Methods of testing plastics - Thermoplastics pipes, fittings and valves - Plastics pipes and fittings - Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
BS 2S 111 Specification for aircraft material - Nickel-chromium-tungsten valve steel
BS 341-3 Transportable gas container valves - Valve outlet connections
BS 341-4 Transportable gas container valves - Pressure relief devices
BS 3457 Specification for materials for water tap and stopvalve seat washers
BS 3727-1 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of aluminium (photometric method)
BS 3727-10 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of silicon 0.020-0.25 per cent (photometric method)
BS 3727-11 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of silicon 0.001-0.020 per cent (photometric method)
BS 3727-12 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of sulphur (combustion method)
BS 3727-13- Methods for the analysis of nickel for use in electronic tubes and valves - Determination of titanium (photometric method)
BS 3727-14 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of tungsten (gravimetric method)
BS 3727-15 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of zinc (photometric method)
BS 3727-16 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of combined and free magnesium
BS 3727-2 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of boron (photometric method)
BS 3727-20 Methods for the analysis of nickel for use in electronic tubes and valves - Spectrographic method
BS 3727-21 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of magnesium (atomic absorption method)
BS 3727-3 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of carbon
BS 3727-4 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of chromium (photometric method)
BS 3727-5 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of cobalt (photometric method)
BS 3727-6 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of copper (photometric method)
BS 3727-7 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of iron (photometric method)
BS 3727-8 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of manganese (photometric method)
BS 3727-9 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of magnesium (photometric method)
BS 4062-2 Valves for hydraulic fluid power systems - Methods for determining performance
BS 4151 Method of evaluating pneumatic valve positioners with input signal of 3 to 15 lbf/in2 (gauge)
BS 4319-1 Methods of measurement of the electrical properties of electronic tubes and valves (excluding microwave devices) - Essential conditions for measuring equivalent input and output admittances
BS 5041-1 Fire hydrant systems equipment - Specification for landing valves for wet risers
BS 5041-2 Fire hydrant systems equipment - Specification for landing valves for dry risers
BS 5041-4 Fire hydrant systems equipment - Specification for boxes for landing valves for dry risers
BS 5158 Specification for cast iron plug valves
BS 5159 Specification for cast iron and carbon steel ball valves for general purposes
BS 5163-1 Valves for waterworks purposes - Predominantly key-operated cast iron gate valves - Code of practice
BS 5163-2 Valves for waterworks purposes - Stem caps for use on isolating valves and associated water control apparatus - Specification
BS 5353Specification for steel plug valves
BS 5433 Specification for underground stopvalves for water services
BS 5672 Specification for designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on an engine for reciprocating internal combustion engines
BS 5793-4 Industrial-process control valves - Specification for inspection and routine testing
BS 5944-4 Measurement of airborne noise from hydraulic fluid power systems and components - Method of determining sound power levels from valves controlling flow and pressure
BS 5998 Specification for quality levels for steel valve castings
BS 6023 Glossary of technical terms for automatic steam traps
BS 6282-1 Devices with moving parts for the prevention of contamination of water by backflow - Specification for check valves of nominal size up to and including DN 54
BS 6282-2 Devices with moving parts for the prevention of contamination of water by backflow - Specification for terminal anti-vacuum valves of nominal size up to and including DN 54
BS 6282-4 Devices with moving parts for the prevention of contamination of water by backflow - Specification for combined check and anti-vacuum valves of nominal size up to and including DN 42
BS 6283-2 Safety and control devices for use in hot water systems - Specifications for temperature relief valves for pressures from 1 bar to 10 bar
BS 6283-4 Safety and control devices for use in hot water systems - Specification for drop-tight pressure reducing valves of nominal size up to and including DN 50 for supply pressures up to and including 12 bar
BS 6290-4 Lead-acid stationary cells and batteries - Specification for classifying valve regulated types
BS 6364 Specification for valves for cryogenic service
BS 6675 Specification for servicing valves (copper alloy) for water services
BS 6683 Guide to installation and use of valves
BS 7016-3 Components and systems of reciprocating internal combustion engines - Glossary of terms for valves, camshaft drive and actuating mechanisms
BS 7296-1 Cavities for hydraulic fluid power cartridge valves - Specification for two-port slip-in valves
BS 7350 Specification for double regulating globe valves and flow measurement devices for heating and chilled water systems
BS 7403-2 Full-flow lubricating oil filters for internal combustion engines - Method of test for element by-pass valve characteristics
BS 7403-9 Full-flow lubricating oil filters for internal combustion engines - Method of test for inlet and outlet anti-drain valves
BS 7438 Specification for steel and copper alloy wafer check valves, single-disk, spring-loaded type
BS 7461 Specification for electrically operated automatic gas shut-off valves fitted with throughput adjusters, proof of closure switches, closed position indicator switches or gas flow control
BS 7478 Guide to selection and use of thermostatic radiator valves
BS 759-1 Valves, gauges and other safety fittings for application to boilers and to piping installations for and in connection with boilers - Specification for valves, mountings and fittings Thermostatic mixing valves for use in care establishments
BS AU 50-3.1e Tyres and wheels - Valves - Dimensions, designation, valve pressure ratings by use and torque for clamp-in valves
BS C 22 Test methods for aircraft inner tube and tubeless tyre valves - Cores and caps Specification for coupling dimensions for high pressure air charging valves for aircraft
BS EN 10090 Valve steels and alloys for internal combustion engines
BS EN 1074-1 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - General requirements
BS EN 1074-2 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Isolating valves
BS EN 1074-3 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Check valves
BS EN 1074-4 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Air valves
BS EN 1074-5 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Control valves
BS EN 1074-6 for water supply - Fitness for purpose requirements and appropriate verification tests - Hydrants
BS EN 1092-1 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Steel flanges
BS EN 1092-2 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Cast iron flanges
BS EN 1092-3 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Copper alloy flanges
BS EN 1092-4 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Aluminium alloy flanges
BS EN 1111 Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification
BS EN 1171 Industrial valves - Cast iron gate valves
BS EN 12050-4 Wastewater lifting plants for buildings and sites - Principles of construction and testing - Non-return valves for faecal-free wastewater and wastewater containing faecal matter
BS EN 12094-13 Fixed firefighting systems - Components for gas extinguishing systems - Requirements and test methods for check valves and non-return valves
BS EN 12094-4 Fixed firefighting systems - Components for gas extinguishing systems - Requirements and test methods for container valve assemblies and their actuators
BS EN 12100 Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports
BS EN 12106 Plastics piping systems - Polyethylene (PE) pipes - Test method for the resistance to internal pressure after application of squeeze-off
BS EN 12107 Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components
BS EN 12117 Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships
BS EN 12119 Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to thermal cycling
BS EN 1213 Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements
BS EN 12201-4 Plastic piping systems for water supply - Polyethylene (PE) - Valves
BS EN 12259-2 Fixed firefighting systems - Components for sprinkler and water spray systems - Wet alarm valve assemblies
BS EN 12259-3 Fixed firefighting systems - Components for sprinkler and water spray systems - Dry alarm valve assemblies
BS EN 12266-1 Industrial valves - Testing of valves - Pressure tests, test procedures and acceptance criteria - Mandatory requirements
BS EN 12266-2 Industrial valves - Testing of valves - Tests, test procedures and acceptance criteria - Supplementary requirements
BS EN 12284 Refrigerating systems and heat pumps - Valves - Requirements, testing and marking
BS EN 12288 Industrial valves - Copper alloy gate valves
BS EN 12334 Industrial valves - Cast iron check valves
BS EN 12351 Industrial valves - Protective caps for valves with flanged connections
BS EN 12380 Air admittance valves for drainage systems - Requirements, test methods and evaluation of conformity
BS EN 12514-2 Installations for oil supply systems for oil burners - Safety requirements and tests - Parts, valves, pipes, filters, oil de-aerators, meters
BS EN 12516-1 Industrial valves - Shell design strength - Tabulation method for steel valve shells
BS EN 12516-2 Industrial vales - Shell design strength - Calculation method for steel valve shells
BS EN 12516-3 Valves - Shell design strength - Experimental method
BS EN 12541 PN10 Sanitary tapware - Pressure flushing valves and automatic closing urinal valves PN 10
BS EN 12567 Industrial valves - Isolating valves for LNG - Specification for suitability and appropriate verification tests
BS EN 12569 Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests
BS EN 12570 Industrial valves - Method for sizing the operating element
BS EN 12627 Industrial valves - Butt welding ends for steel valves
BS EN 1267 Valves - Test of flow resistance using water as a test fluid
BS EN 12760 Valves - Socket welding ends for steel valves
BS EN 1286 Sanitary tapware - Low pressure mechanical mixing valves - General technical specification
BS EN 1287 Sanitary tapware - Low pressure thermostatic mixing valves - General technical specifications
BS EN 12982 Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves
BS EN 13082 Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve
BS EN 13152 Specification and testing of LPG cylinder valves - Self closing
BS EN 13153 Specification and testing of LPG cylinder valves - Manually operated
BS EN 13175 Specification and testing for liquefied petroleum gas (LPG) tank valves and fittings
BS EN 13244-4 Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Valves
BS EN 13308 Tanks for transport of dangerous goods - Service equipment for tanks - Non pressure balanced footvalve
BS EN 13312-5 Biotechnology - Performance criteria for piping and instrumentation - Valves
BS EN 13316 Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve
BS EN 13397 Industrial valves - Diaphragm valves made of metallic materials
BS EN 1349 Industrial process control valves
BS EN 13617-3 Petrol filling stations - Safety requirements for constuction and performance of shear valves
BS EN 13648-1 Cryogenic vessels - Safety devices for protection against excessive pressure - Safety valves for cryogenic service
BS EN 1366-2 Fire resistance tests for service installations - Fire dampers
BS EN 13709 Industrial valves - Steel globe and globe stop and check valves
BS EN 13774 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements
BS EN 13786 Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures
BS EN 13789 Industrial valves - Cast iron globe valves
BS EN 13792 Colour coding of taps and valves for use in laboratories
BS EN 13828 Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings - Tests and requirements
BS EN 13942 Petroleum and natural gas industries - Pipeline transportation - Pipeline valves
BS EN 13953 Pressure relief valves for transportable refillable cylinders for liquefied petroleum gas (LPG)
BS EN 14071 Pressure relief valves for LPG tanks - Ancillary equipment
BS EN 14124 Inlet valves for flushing cisterns with internal overflow
BS EN 14129 Pressure relief valves for LPG tanks
BS EN 14141 Valves for natural gas transportation in pipelines - Performance requirements and tests
BS EN 14189 Transportable gas cylinders - Inspection and maintenance of cylinder valves at time of periodic inspection of gas cylinders
BS EN 14382 Safety devices for gas pressure regulating stations and installations Gas safety shut-off devices for inlet pressures up to 100 bar
BS EN 144-1 Respiratory protective devices - Gas cylinder valves - Thread connections for insert connector
BS EN 144-2 Respiratory protective devices - Gas cylinder valves - Outlet connections
BS EN 144-3 Respiratory protective devices - Gas cylinder valves - Outlet connections for diving gases Nitrox and oxygen
BS EN 1452-4 Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Valves and ancillary equipment
BS EN 14529 Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only
BS EN 14593-1 Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Apparatus with a full mask - Requirements, testing, marking
BS EN 14593-2 Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Apparatus with a half mask at positive pressure - Requirements, testing, marking
BS EN 14596 Tanks for transport of dangerous goods - Service equipment for tanks - Emergency pressure relief valve
BS EN 14848 Aerosol containers Metal containers with 25,4 mm aperture Dimensions of valve cups
BS EN 14849 Aerosol containers Glass containers Dimensions of aerosol valve ferrules
BS EN 1487 Building valves - Hydraulic safety groups - Tests and requirements
BS EN 1488 Building valves - Expansion groups - Tests and requirements
BS EN 1489 Building valves - Pressure safety valves - Tests and requirements
BS EN 1490 Building valves - Combined temperature and pressure relief valves - Tests and requirements
BS EN 1491 Building valves - Expansion valves - Tests and requirements
BS EN 1503-1 Valves - Materials for bodies, bonnets and covers - Steels specified in European Standards
BS EN 1503-2 Valves - Materials for bodies, bonnets and covers - Steels other than those specified in European Standards
BS EN 1503-3 Valves - Materials for bodies, bonnets and covers - Cast irons specified in European Standards
BS EN 1503-4 Valves - Materials for bodies, bonnets and covers - Copper alloys specified in European Standards
BS EN 1555-4 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Valves
BS EN 1567 Building valves - Water pressure reducing valves and combination water reducing valves - Requirements and tests
BS EN 161 Automatic shut-off valves for gas burners and gas appliances
BS EN 1626 Cryogenic vessels - Valves for cryogenic service
BS EN 1643 Valve proving systems for automatic shut-off valves for gas burners and gas appliances
BS EN 1680 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism
BS EN 1704 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending
BS EN 1705 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow
BS EN 1751 Ventilation for buildings - Air terminal devices - Aerodynamic testing of dampers and valves
BS EN 1759-1 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class-designated - Steel flanges, NPS 1/2 to 24
BS EN 1759-3 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Copper alloy flanges
BS EN 1759-4 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Aluminium alloy flanges
BS EN 1827 Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking
BS EN 19 Industrial valves - Marking of metallic valves
BS EN 1984 Industrial valves - Steel gate valves
BS EN 215 Thermostatic radiator valves - Requirements and test methods
BS EN 26553 Specification for marking of automatic steam traps
BS EN 26554 Specification for face-to-face dimensions for flanged automatic steam traps
BS EN 26704 Classification of automatic steam traps
BS EN 26948 Specification for production and performance characteristic tests for automatic steam traps
BS EN 27841 Methods for determination of steam loss of automatic steam traps
BS EN 27842 Methods for determination of discharge capacity of automatic steam traps
BS EN 28233 Thermoplastics valves - Torque - Test method
BS EN 28659 Thermoplastics valves - Fatigue strength - Test method
BS EN 331 Manually operated ball valves and closed bottom taper plug valves for gas installations in buildings
BS EN 405 Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking
BS EN 417 Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances - Construction, inspection, testing and marking
BS EN 45510-7-1 Guide for the procurement of power station equipment - Pipework and valves - High pressure piping systems - Section 1: High pressure piping systems
BS EN 45510-7-2 Guide for the procurement of power station equipment - Pipework and valves - Boiler and high pressure valves - Section 2: Boiler and high pressure valves
BS EN 488 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
BS EN 50216-8 Power transformer and reactor fittings Part 8: Butterfly valves for insulating liquid circuits
BS EN 558-1 Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN-designated valves
BS EN 558-2 Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - Class-designated valves
BS EN 561 Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes
BS EN 593 Industrial valves - Metallic butterfly valves
BS EN 60534-1 Industrial-process control valves - Control valve terminology and general considerations
BS EN 60534-2-1 Industrial-process control valves - Flow capacity - Flow capacity - Sizing equations for fluid flow under installed conditions
BS EN 60534-2-3 Industrial-process control valves - Flow capacity - Test procedures
BS EN 60534-2-5 Industrial-process control valves - Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery
BS EN 60534-3-1 Industrial-process control valves - Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves
BS EN 60534-3-2 Industrial-process control valves - Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves
BS EN 60534-3-3 Industrial-process control valves - Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves
BS EN 60534-5 Industrial-process control valves - Marking
BS EN 60534-6-1 Industrial-process control valves - Mounting details for attachment of positioners to control valves - Positioner mounting on linear actuators
BS EN 60534-6-2 Industrial-process control valves - Mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators - Positioner mounting on rotary actuators
BS EN 60534-8-1 Industrial-process control valves Part 8-1: Noise considerations Laboratory measurement of noise generated by aerodynamic flow through control valves
BS EN 60534-8-2 Industrial-process control valves - Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves
BS EN 60534-8-3 Industrial-process control valves - Noise considerations - Control valve aerodynamic noise prediction method - Control valve aerodynamic noise prediction method
BS EN 60534-8-4 Industrial-process control valves - Noise considerations - Prediction of noise generated by hydrodynamic flow
BS EN 60700-1 Thyristor valves for high voltage direct current (HVDC) power transmission - Electrical testing
BS EN 60730-2-19 Specification for automatic electrical controls for household and similar use - Particular requirements - Particular requirements for electrically operated oil valves, including mechanical requirements
BS EN 60730-2-8 Specification for automatic electrical controls for household and similar use - Particular requirements - Particular requirements for electrically operated water valves, including mechanical requirements
BS EN 60896-21 Stationary lead-acid batteries - Valve regulated types - Methods of test
BS EN 60896-22 Stationary lead-acid batteries - Valve regulated types - Requirements
BS EN 61056-1 Portable lead-acid cells and batteries (valve-regulated types) - General requirements, functional characteristics - Methods of test
BS EN 61056-2 Portable lead-acid cells and batteries (valve-regulated types) - Dimensions, terminals and marking
BS EN 61514-2 Industrial process control systems - Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs
BS EN 61514 Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs
BS EN 61954 Power electronics for electrical transmission and distribution systems - Testing of thyristor valves for static VAR compensators
BS EN 629-1 Transportable gas cylinders - 25E taper thread for connection of valves to gas cylinders - Specification
BS EN 629-2 Transportable gas cylinders - 25E taper thread for connection of valves to gas cylinders - Gauge inspection
BS EN 736-1 Valves - Terminology - Definition of types of valves
BS EN 736-2 Valves - Terminology - Definition of components of valves
BS EN 736-3 Valves - Terminology - Definition of terms
BS EN 738-3 Pressure regulators for use with medical gases - Pressure regulators integrated with cylinder valves
BS EN 816 PN 10 Sanitary tapware - Automatic shut-off valves PN 10
BS EN 917 Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness
BS EN 962 Transportable gas cylinders - Valve protection caps and valve guards for industrial and medical gas cylinders - Design, construction and tests
BS EN ISO 10417 Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress
BS EN ISO 10432 Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment
BS EN ISO 10434 Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries
BS EN ISO 10497 Testing of valves - Fire type-testing requirements
BS EN ISO 10692-2 Gas cylinders - Gas cylinder valve connections for use in the microelectronics industry - Specification and type testing for valve to cylinder connections
BS EN ISO 11114-1 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Metallic materials
BS EN ISO 11114-2 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Non-metallic materials
BS EN ISO 11114-3 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Autogenous ignition test in oxygen atmosphere
BS EN ISO 11116-1 Gas cylinders - 17E taper thread for connection of valves to gas cylinders - Specifications
BS EN ISO 11116-2 Gas cylinders - 17E taper thread for connection of valves to gas cylinders - Inspection gauges
BS EN ISO 12209-1 Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Yoke type connections
BS EN ISO 12209-2 Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Threaded connections
BS EN ISO 12209-3-2001 Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Adaptor for 230 bar valves
BS EN ISO 13340 Transportable gas cylinders - Cylinder valves for non-refillable cylinders - Specification and prototype testing
BS EN ISO 13341 Transportable gas cylinders - Fitting of valves to gas cylinders
BS EN ISO 13758 Methods of test for petroleum and its products - Liquefied petroleum gases - Assessment of the dryness of propane - Valve freeze method
BS EN ISO 14246 Transportable gas cylinders - Gas cylinder valves - Manufacturing tests and inspections
BS EN ISO 14723 Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves
BS EN ISO 15245-1 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Specification
BS EN ISO 15245-2 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Gauge inspection
BS EN ISO 15364 Ships and marine technology - Pressure/vacuum valves for cargo tanks
BS EN ISO 15761 Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries
BS EN ISO 15848-1 Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Classification system and qualification procedures for type testing of valves
BS EN ISO 15996 Gas cylinders - Residual pressure valves - General requirements and type testing
BS EN ISO 17292 Metal ball valves for the petroleum, petrochemical and allied industries
BS EN ISO 3822-2 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Mounting and operating conditions for draw-off taps and mixing valves
BS EN ISO 3822-3 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Mounting and operating conditions for in-line valves and appliances
BS EN ISO 407 Small medical gas cylinders - Pin-index yoke-type valve connections
BS EN ISO 4126-1 Safety devices for protection against excessive pressure - Safety valves
BS EN ISO 4126-4 Safety devices for protection against excessive pressure - Pilot operated safety valves
BS EN ISO 5135 Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room
BS EN ISO 5210 Industrial valves - Multi-turn valve actuator attachments
BS EN ISO 5211 Industrial valves - Part-turn actuator attachments
BS EN ISO 9093-1 Small craft - Seacocks and through-hull fittings - Metallic
BS ISO 10294-2 Fire-resistance tests - Fire dampers for air distribution systems - Classification, criteria and field of application of test results
BS ISO 10294-4 Fire-resistance tests - Fire dampers for air distribution systems - Test of thermal release mechanism
BS ISO 10294-5 Fire-resistance tests - Fire dampers for air distribution systems - Intumescent fire dampers
BS ISO 10372 Hydraulic fluid power - Four-and five-port servovalves - Mounting surfaces
BS ISO 10770-1 Hydraulic fluid power - Electrically modulated hydraulic control valves - Test methods for four-way directional flow control valves
BS ISO 10770-2 Hydraulic fluid power - Electrically modulated hydraulic control valves - Test methods for three-way directional flow control valves
BS ISO 11727 Pneumatic fluid power - Identification of ports and control mechanisms of control valves and other components
BS ISO 11929-4 Determination of the detection limit and decision threshold for ionizing radiation measurements - Fundamentals and application to measurements by use of linear-scale analogue ratemeters, without the influence of sample treatment
BS ISO 12238 Pneumatic fluid power - Directional control valves - Measurement of shifting time
BS ISO 14617-8 Graphical symbols for diagrams - Valves and dampers
BS ISO 15218 Pneumatic fluid power - 3/2 solenoid valves - Mounting interface surfaces
BS ISO 15364 Ships and marine technology Pressure/vacuum valves for cargo tanks
BS ISO 15407-1 Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Mounting interface surfaces without electrical connector
BS ISO 15407-2 Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Mounting interface surfaces with optional electrical connector
BS ISO 15665 Acoustics - Acoustic insulation for pipes, valves and flanges
BS ISO 17082 Pneumatic fluid power - Valves - Data to be included in supplier literature
BS ISO 20401 Pneumatic fluid power systems - Directional control valves - Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm
BS ISO 4401 Hydraulic fluid power - Four-port directional control valves - Mounting surfaces
BS ISO 5599-1 Pneumatic fluid power - Five-port directional control valves - Mounting interface surfaces without electrical connector
BS ISO 5599-2 Pneumatic fluid power - Five-port directional control valves - Mounting interface surfaces with optional electrical connector
BS ISO 5781 Hydraulic fluid power - Pressure reducing valves, sequence valves , unloading valves, throttle valves and check valves - Mounting surfaces
BS ISO 6263 Hydraulic fluid power - Compensated flow-control valves - Mounting surfaces
BS ISO 6264 Hydraulic fluid power - Pressure-relief valves - Mounting surfaces
BS ISO 6953-2 Pneumatic fluid power - Compressed air pressure regulators and filter-regulators - Test methods to determine the main characteristics to be included in literature from suppliers
BS ISO 7789 Hydraulic fluid power - Two-, three- and four-port screw-in cartridge valves - Cavities
BS ISO Hydraulic fluid power - Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 - Clamping dimensions
BS ISO 9393-1 Thermoplastics valves for industrial applications - Pressure test methods and requirements - General
BS ISO/TR 7470 Valve outlets for gas cylinders - List of provisions which are either standardized or in use
BS MA 5 Specification for brass service nameplates for valves