ANSI VALVE STANDARD
ANSI A112.14.1 Backwater valves
ANSI B93.112M Hydraulic Fluid Power - Valves - Method for Determining the Internal Leakage Characteristics
ANSI B93.77M Hydraulic Fluid Power - Cylinder Actuator Mounted Valves - Standard Dimensions for Mounting Surfaces
ANSI B93.9M Symbols for Marking Electrical Leads and Ports on Fluid Power Valves
ANSI T1.330 Telecommunications - Valve-regulated lead-acid batteries used in the telecommunications environment
ANSI Z21.15 Manually Operated Gas Valves for Appliances, Appliance Connector Valves and Hose End Valves (same as CGA 9.1)
ANSI Z21.15a Manually Operated Gas Valves for Appliances, Appliance Connector Valves and Hose End Valves (same as CGA 9.1a)
ANSI Z21.21 Automatic Valves for Gas Appliances (same as CSA 6.5)
ANSI Z21.21b Automatic Valves for Gas Appliances (same as CSA 6.5b)
ANSI Z21.22 Relief Valves for Hot Water Supply Systems (same as CSA 4.4-1998)
ANSI Z21.22a Addenda Relief valves and automatic gas shutoff devices for hot water supply systems; Addenda
ANSI Z21.22a Pressure Relief Valves and Vacuum Relief Valves
ANSI Z21.22b Relief Valves for Hot Water Supply Systems (same as CSA 4.4b)
ANSI Z21.79 Gas Appliances Sediment Traps
ANSI Z21.79a Gas Appliance Sediment Traps (Same as CGA 6.21a)
ANSI/API 14A Specification for Subsurface Safety Valve Equipment
ANSI/API 553 Refinery Control Valve
ANSI/API 574 Inspection of Piping, Tubing, Valves, and Fittings
ANSI/API 599 Metal Plug Valves - Flanged and Welding Ends
ANSI/API 603 Class 150, Cast, Corrosion-Resistant, Flanged-End Gate Valves
ANSI/API 608 Metal Ball Valves - Flanged and Butt-Welding Ends
ANSI/API 621 Reconditioning of Metallic Gate, Globe, and Check Valves
ANSI/API Std.600 Bolted Bonnet Steel Gate Valves for Petroleum and Natural Gas Industries
ANSI/API STD600 Bolted Bonnet Steel Gate Valves for Petroleum and Natural Gas Industries
ANSI/ARI 750 Thermostatic Refrigerant Expansion Valves
ANSI/ARI 770 Refrigerant Pressure Regulating Valves
ANSI/ASHRAE 158.1 Methods of Testing Capacity of Refrigerant Solenoid Valves
ANSI/ASHRAE 17 Capacity Rating of Thermostatic Refrigerant Expansion Valves, Method of Testing for
ANSI/ASME A112.14.1 Backwater Valves
ANSI/ASME A112.18.7M Deck Mounted Bath/Shower Transfer Valves with Internal Backflow Prevention
ANSI/ASME A112.4.1 Water Heater Relief Valve Drain Tubes
ANSI/ASME A112.4.14 Manually Operated, Quarter-Turn Shutoff Valves for Use in Plumbing Systems
ANSI/ASME B16.10 Face-to-Face and End-to-End Dimensions of Valves
ANSI/ASME B16.33 Manually Operated Metallic Gas Valves for Use in Gas Piping Systems up to 125 psig
ANSI/ASME B16.34 Valves - Flanged, Threaded and Welding End
ANSI/ASME B16.38 Large Metallic Valves for Gas Distribution (Manually Operated, NPS 2 1/2 to 12, 125 psig Maximum)
ANSI/ASME B16.40 Gas Shut-Offs and Valves in Gas Distribution Systems, Manually Operated Thermoplastic
ANSI/ASME B16.44 Manually Operated Metallic Gas Valves for Use in House Piping Systems
ANSI/ASME B16.44a Manually Operated Metallic Gas Valves for Use in House Piping Systems
ANSI/ASSE 1003 Performance Requirements for Water Pressure Reducing Valves
ANSI/ASSE 1016 Performance Requirements for Automatic Compensating Valves for Individual Showers and Showers in Tub/Shower Combinations
ANSI/ASSE 1017 Performance Requirements for Temperature Actuated Mixing Valves for Primary Domestic Use
ANSI/ASSE 1018 Trap Seal Primer Valves - Potable Water Supplied
ANSI/ASSE 1024 Dual Check Valve Type Backflow Preventers
ANSI/ASSE 1044 Trap Seal Primer Devices - Drainage Types and Electronic Design Types
ANSI/ASSE 1051 Air Admittance Valves for Plumbing Drainage Systems
ANSI/ASSE 1056 Back Siphonage Backflow Vacuum Breakers
ANSI/ASSE 1069 Performance Requirements for Automatic Temperature Control Mixing Valves
ANSI/ASTM A182/A 182M Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
ANSI/ASTM B834 Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves and Parts
ANSI/ASTM D2713 Test Method for Dryness of Propane (Valve Freeze Method)
ANSI/ASTM D5500 Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit (05.03)
ANSI/ASTM D6201 Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Value Deposit Formation
ANSI/ASTM E1008 Practice for Installation, Inspection, and Maintenance of Value Body Pressure Relief Methods for Geothermal and Other High-Temperature Applications
ANSI/ASTM F1020 Practice for Line Blind Valves for Marine Applications
ANSI/ASTM F1030 Practice for Selection of Valve Operators
ANSI/ASTM F1098 Specification for Envelope Dimensions for Butterfly Valves - NPS 2 to 24
ANSI/ASTM F1139 Specification for Steam Traps and Drains
ANSI/ASTM F1271 Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications
ANSI/ASTM F1370 Specification for Pressure-Reducing Valves for Water Systems, Shipboard
ANSI/ASTM F1508 Specification for Angle Style, Pressure Relief Valves for Steam, Gas, and Liquid Services
ANSI/ASTM F1565 Specification for Pressure-Reducing Valves for Steam Service
ANSI/ASTM F1792 Specification for Special Requirements for Valves Used in Gaseous Oxygen Service
ANSI/ASTM F1793 Specification for Automatic Shut-Off Valves (also known as Excess Flow Valves EFV) for Air or Nitrogen Service
ANSI/ASTM F1794 Specification for Hand-Operated Globe-Style Valves for Gas (Except Oxygen Gas) and Hydraulic Systems
ANSI/ASTM F1795 Specification for Pressure-Reducing Valves for Air or Nitrogen Systems
ANSI/ASTM F1802 Test Method for Performance Testing of Excess Flow Valves
ANSI/ASTM F1970 Specification for Special Engineered Fittings, Appurtenances or Valves for Use in Poly(Vinyl Chloride) (PVC) or Chlorinated Poly(Vinyl Chloride) (CPVC) Systems
ANSI/ASTM F1985 Specification for Pneumatic-Operated, Globe-Style, Control Valves
ANSI/ASTM F2138 Specification for Excess Flow Valves for Natural Gas Service
ANSI/ASTM F2324 Test Method for Pre-rinse Spray Valves
ANSI/ASTM F885 Specification for Envelope Dimensions for Bronze Globe Valves NPS 1/4 to 2
ANSI/ASTM F992 Specification for Valve Label Plates
ANSI/ASTM F993 Specification for Valve Locking Devices
ANSI/AWWA C500 Gate Valves for Water and Sewage Systems
ANSI/AWWA C504 Rubber-Seated Butterfly Valves
ANSI/AWWA C507 Ball Valves 6 in (150 mm) through 48 in (1200 mm)
ANSI/AWWA C508 Swing-Check Valves for Waterworks Service, 2 in (50 mm) through 24 in (600 mm) NPS
ANSI/AWWA C510 Double Check Valve Backflow-Prevention Assembly
ANSI/AWWA C512 Air Release, Air/Vacuum, and Combination Air Valves for Water Works Service
ANSI/AWWA C517 Resilient-Seated Cast Iron Eccentric Plug Valves
ANSI/AWWA C540 Power-Actuating Devices for Valves and Sluice Gates
ANSI/AWWA C550 Protective Interior Coatings for Valves and Hydrants
ANSI/AWWA C800 Underground Service Line Valves and Fittings
ANSI/FCI 69-1 Pressure Rating Standard for Steam Traps
ANSI/FCI 91-1 Standard for Qualification of Control Valve Stem Seals
ANSI/IAS NGV4.6 Manually Operated Valves for Natural Gas Dispensing Systems
ANSI/IAS NGV4.7 Automatic Pressure-Operated Valves for Natural Gas Dispensing Systems
ANSI/IEEE 1187 Recommended Practice for Installation Design and Installation of Valve Regulated Lead-Acid Storage Batteries for Stationary Applications
ANSI/IEEE 1189 Guide for the Selection of Valve-Regulated Lead-Acid (VRLA) Batteries for Stationary Application
ANSI/IEEE 1290 Guide for MOV (Motor-Operated Valve) Motor Application, Protection, Control, and Testing in Nuclear Power Generating Stations
ANSI/IEEE 382 Actuators for Power-Operated Valve Assemblies with Safety-Related Functions for Nuclear Power-Plants, Qualification of
ANSI/IEEE 857 Recommended Practice for Test Procedures for High Voltage Direct Current Thyristor Valves
ANSI/IEEE C62.32 Air Gap Surge-Protective Devices (Excluding Valve and Expulsion-Type Devices), Test Specifications for the Low-Voltage
ANSI/IIAR 3 Ammonia Refrigeration Valves
ANSI/ISA 75.01.01 Flow Equations for Sizing Control Valves
ANSI/ISA 75.02 Control Valve Capacity Test Procedures
ANSI/ISA 75.04 Face-to-Face Dimensions of Flangeless Control Valves (ANSI Classes 150, 300, and 600)
ANSI/ISA 75.05.01 Control Valve Terminology
ANSI/ISA 75.08 Installed Face-to-Face Dimensions for Flanged Clamp or Pinch Valves
ANSI/ISA 75.08.01 Face-to-Face Dimensions for Integral Flanged Globe-Style Control Valve Bodies (Classes 125, 150, 250, 300, and 600)
ANSI/ISA 75.08.02 Face-to-Face Dimensions for Flangeless Control Valves (Classes 150, 300, and 600)
ANSI/ISA 75.08.03 Face-to-Face Dimensions for Socket Weld-End and Screwed-End Globe-Style Control Valves (ANSI Classes 150, 300, 600, 900, 1500, and 2500)
ANSI/ISA 75.08.04 Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves
ANSI/ISA 75.08.05 Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (Classes 150, 300, 600, 900, 1500, and 2500)
ANSI/ISA 75.08.06 Face-to-Face Dimensions for Flanged Globe-Style Control Valve Bodies (Classes 900, 1500, and 2500)
ANSI/ISA 75.08.07 Face-to-Face Dimensions for Separable Flanged Globe-Style Control Valves (Classes 150, 300, and 600)
ANSI/ISA 75.08.09 Face-to-Face Dimensions for Sliding Stem Flangeless Control Valves (Classes 150, 300, and 600)
ANSI/ISA 75.11.01 Control Valves, Inherent Flow Characteristic and Rangeability of
ANSI/ISA 75.19.01 Hydrostatic Testing of Control Valves
ANSI/ISA 75.22 Face-to-Centering Dimensions for Flanged Globe-Style Angle Control Valve Bodies
ANSI/ISA 75.25.01 Test Procedures for Control Valve Response Measurement from Step Inputs
ANSI/ISA S75.02 Control Valve Capacity Test Procedures
ANSI/ISA S75.04 Face-to-Face Dimensions of Flangeless Control Valves (ANSI Classes 150, 300, and 600)
ANSI/ISA S75.08 Installed Face-to-Face Dimensions for Flanged Clamp or Pinch Valves
ANSI/ISA S75.08.03 Face-to-Face Dimensions for Socket Weld-End and Screwed-End Globe-Style Control Valves (ANSI Classes 150, 300, 600, 900, 1500, and 2500)
ANSI/ISA S75.08.04 Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves
ANSI/ISA S75.08.07 Face-to-Face Dimensions for Separable Flanged Globe-Style Control Valves (Classes 150, 300, and 600)
ANSI/ISA S75.11 Control Valves, Inherent Flow Characteristic and Rangeability of
ANSI/ISA S75.14 Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves
ANSI/ISA S75.19.01 Hydrostatic Testing of Control Valves
ANSI/ISA S75.22 Face-to-Centering Dimensions for Flanged Globe-Style Angle Control Valve Bodies
ANSI/ISA S93.00.01 Standard Method for the Evaluation of External Leakage of Manual and Automated On-Off Valves
ANSI/ISA TR75.25.02 Control Valve Response Measurement from Step Inputs
ANSI/NFPA 1964 Spray Nozzles (Shutoff and Tip)
ANSI/SAE J1118 Hydraulic Valves for Motor Vehicle Brake Systems Test Procedure
ANSI/SAE J1409 Air Brake Valves Test Procedure
ANSI/SAE J1410 Air Brake Valve - Performance Requirements
ANSI/SAE J351 Oil Tempered Carbon Steel Valve, Spring Quality Wire, and Springs
ANSI/UL 1002 Electrically Operated Valves for Use in Hazardous (Classified) Locations
ANSI/UL 125 Standard for Safety for Valves for Anhydrous Ammonia and LP-Gas (Other than Safety Relief)
ANSI/UL 132 Standard for Safety for Safety Relief Valves for Anhydrous Ammonia and LP-Gas
ANSI/UL 144 Standard for Safety for Pressure-Regulating Valves for LP Gas
ANSI/UL 1468 Direct-Acting Pressure-Reducing and Pressure-Control Valves for Fire Protection Service
ANSI/UL 1478 Fire Pump Relief Valves
ANSI/UL 1486 Standard for Safety for Quick Opening Devices for Dry Pipe Valves for Fire Protection Service
ANSI/UL 1739 Pilot-Operated Pressure-Control Valves for Fire-Protection Service
ANSI/UL 193 Alarm Valves for Fire-Protection Service
ANSI/UL 312 Check Valves for Fire-Protection Service
ANSI/UL 668 Hose Valves for Fire Protection Service
ANSI/UL 753- Alarm Accessories for Automatic Water-Supply Control Valves for Fire-Protection Service
ANSI/UL 842 Valves for Flammable Fluids
ASME A112.14.1 (Backwater valves)
ASME A112.18.7 (Deck mounted bath/shower transfer valves with integral backflow protection)
ASME A112.4.1 (Water heater relief valve drain tubes)
ASME B 16.40 Erratum (Manually operated thermoplastic gas shutoffs and valves in gas distribution systems; Erratum to ASME B16.40-2002)
ASME B16.10 (Face-to-face and end-to-end dimensions of valves)
ASME B16.33 (Manually operated metallic gas valves for use in gas piping systems up to 125 psi (sizes NPS 1/2 through NPS 2))
ASME B16.34 (Valves - Flanged, threaded, and welding end)
ASME B16.34a Addenda (Valves - Flanged, threaded, and welding end; Addenda)
ASME B16.38 (Large metallic valves for gas distribution (manually operated, NPS 2 1/2 to 12, 125 psig maximum))
ASME B16.40 (Manually operated thermoplastic gas shutoffs and valves in gas distribution systems)
ASME B40.6 (Pressure limiter valves)
ASME N278.1 (Self-operated and power-operated safety-related valves - Functional specification standard)
ASME PTC 25.3 (Safety and relief valves)
ASME Y32.2.3 (Graphical symbols for pipe fittings, valves and piping)
ASTM A 126 Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
ASTM A 182/A 182Ma Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
ASTM A 230/A 230M Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality
ASTM A 232/A 232M Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
ASTM A 338 Malleable Iron Flanges, Pipe Fittings and Valve Parts for Railroad, Marine and Other Heavy Duty Service at Temperatures up to 650 Degrees F (345 Degrees C)
ASTM A 522/A 522M Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
ASTM A 694/A 694M Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
ASTM A 877/A 877M Standard Specification for Steel Wire, Chromium-Silicon Alloy Valve Spring Quality
ASTM A 878/A 878M Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality
ASTM A 961/A 961M Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
ASTM A 988/A 988M Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM A 989/A 989M Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM B 61 Standard Specification for Steam or Valve Bronze Castings
ASTM B 763 Standard Specification for Copper Alloy Sand Castings for Valve Applications
ASTM B 834 Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves, and Parts
ASTM C 1129 Standard Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges
ASTM D 2512 Standard Test Method for Compatibility of Materials with Liquid Oxygen (Impact Sensitivity Threshold and Pass-Fail Techniques)
ASTM D 2713 Standard Test Method for Dryness of Propane (Valve Freeze Method)
ASTM D 3076 Standard Test Methods for Effective Crimping on Outside Crimped Valves of Aerosol Containers
ASTM D 3089 Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
ASTM D 5500 Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation
ASTM D 6201 Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation
ASTM E 1008 Standard Practice for Installation, Inspection, and Maintenance of Valve-body Pressure-relief Methods for Geothermal and Other High-Temperature Liquid Applications
ASTM E 675 Standard Specification for Interchangeable Taper-Ground Stopcocks And Stoppers
ASTM E 911 Standard Specification for Glass Stopcocks with Polytetrafluoroethylene (PTFE) Plugs
ASTM F 1020 Standard Specification for Line-Blind Valves for Marine Applications
ASTM F 1030 Standard Practice for Selection of Valve Operators
ASTM F 1094 Test Methods for Microbiological Monitoring of Water Used for Processing Electron and Microelectronic Devices by Direct Pressure Tap Sampling Valve and by the Presterilized Plastic Bag Method
ASTM F 1098 Standard Specification for Envelope Dimensions for Butterfly Valves-NPS 2 to 24
ASTM F 1139 Standard Specification for Steam Traps and Drains
ASTM F 1271 Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications
ASTM F 1370 Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard
ASTM F 1373 Standard Test Method for Determination of Cycle Life of Automatic Valves for Gas Distribution System Components
ASTM F 1394 Standard Test Method for Determination of Particle Contribution from Gas Distribution System Valves
ASTM F 1431 Standard Specification for Water Trap for Diesel Exhaust
ASTM F 1508 Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services
ASTM F 1565 Standard Specification for Pressure-Reducing Valves for Steam Service
ASTM F 1792 Standard Specification for Special Requirements for Valves Used in Gaseous Oxygen Service
ASTM F 1793 Standard Specification for Automatic Shut-Off Valves (Also Known as Excess Flow Valves, EFV) for Air Or Nitrogen Service
ASTM F 1794 Standard Specification for Hand-Operated, Globe-Style Valves for Gas (Except Oxygen Gas), and Hydraulic Systems
ASTM F 1795 Standard Specification for Pressure-Reducing Valves for Air or Nitrogen Systems
ASTM F 1802 Standard Test Method for Performance Testing of Excess Flow Valves
ASTM F 1970 Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
ASTM F 1985 Standard Specification for Pneumatic-Operated, Globe-Style, Control Valves
ASTM F 2138 Standard Specification for Excess Flow Valves for Natural Gas Service
ASTM F 2215 Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications
ASTM F 2324 Standard Test Method for Prerinse Spray Valves
ASTM F 885 Standard Specification for Envelope Dimensions for Bronze Globe Valves NPS 1/4 to 2
ASTM F 992 Standard Specification for Valve Label Plates
ASTM F 993 Standard Specification for Valve Locking Devices
IEEE 1187 (Recommended practice for installation design and installation of valve-regulated lead-acid storage batteries for stationary applications)
IEEE 1188 (Recommended practice for maintenance, testing, and replacement of valve-regulated lead-acid (VRLA) batteries for stationary applications)
IEEE 1189 (Guide for selection of valve-regulated lead-acid (VRLA) batteries for stationary applications)
IEEE 1290 (Guide for motor operated valve (MOV) motor application, protection, control, and testing in nuclear power generating stations)
IEEE 382 (Qualification of actuators for power-operated valve assemblies with safety-related functions for nuclear power plants)
IEEE 857 (Recommended practice for test procedures for high-voltage direct-current thyristor valves)
UL 1002 (Electrically operated valves for use in hazardous (classified) locations )
UL 1091 (Butterfly valves for fire-protection service )
UL 1106 (Marine manually operated shutoff valves for flammable liquids )
UL 1121 (Marine through-hull fittings and sea-valves )
UL 125 (Valves for anhydrous ammonia and LP-gas (other than safety relief) )
UL 132 (Safety relief valves for anhydrous ammonia and LP-gas )
UL 144 (LP-gas regulators )
UL 1468 (Direct acting pressure reducing and pressure restricting valves )
UL 1469 (Strength of body and hydraulic pressure loss testing of backflow special check valves )
UL 1478 (Fire pumps relief valves )
UL 1486 (Quick opening devices for dry pipe valves for fire protection service )
UL 17 (Vent or chimney connector dampers for oil-fired appliances )
UL 1726 (Automatic drain valves for standpipe systems )
UL 1739 (Pilot-operated pressure-control valves for fire-protection service )
UL 1769 (Cylinder valves )
UL 193 (Alarm valves for fire-protection service)
UL 260 (Dry pipe and deluge valves for fire-protection service )
UL 262 (Gate valves for fire-protection service )
UL 312 (Check valves for fire-protection service )
UL 352 (Constant-level oil valves )
UL 429 (Electrically operated valves )
UL 668 (Hose valves for fire-protection service )
UL 753 (Alarm accessories for automatic water-supply control valves for fire protection service )
UL 842 (Valves for flammable fluids )