Back to Category >>products


Pipe Fittings

1. Elbow 90°  long  radius
2. Elbow 45°
3. Elbow 90°  short radius
4. Elbow 180° long  radius
5. Elbow 180° short radius
6. Tee straight
7. Tee reducing
8. Reducer concentric
9. Reducer eccentric
10.End cap
11.Lap joint Stub End

Reference Standards:
ASME B16.9 Factory-Made Wrought Steel Buttwelding Fittings
ASME B16.28 Wrought Steel Buttwelding Short Radius Elbows and Returns
ASME B16.25 Buttwelding Ends
GOST 17375  17376 17378 17379
MSS SP-43  Wrought Stainless Steel Butt-Welding Fittings
MSS SP-75 High-Test, Wrought, Butt-Welding Fittings
ASTM A234Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature
ASTM A860Wrought High-Strength Low-Alloy Steel Butt-Welding Fittings
ASTM A420Piping Fittings of  Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
ASTM A403 Wrought Austenitic Stainless Steel Piping Fittings
ASTM A960 Common Requirements for Wrought Steel Piping Fittings

DIN 2605-1 Steel butt-welding pipe fittings:Elbows and bends with reduced pressure factor
DIN 2605-2 Steel butt-welding pipe fittings:Elbows and bends for use at full service pressure
DIN 2615-1 Steel butt-welding pipe fittings:Tees with reduced pressure factor
DIN 2615-2 Steel butt-welding pipe fittings:Tees for use at full service pressure
DIN 2616-1 Steel butt-welding pipe fittings:Eccentric reducers with reduced pressure factor
DIN 2616-2 Steel butt-welding pipe Reducers for use at full service pressure

GB/T12459  Steel butt-welding seamless pipe fittings
GB/T13401 Steel plate butt-welding pipe fittings
SH3408 Steel butt-welding seamless fittings
SH3409 Steel plate butt-welding  fittings
SY/T0609 Specification for high test wrought butt welding fittings (MSS SP 75,MOD)


GRADES OFFERED :
Stainless Steel: ASTM, A403, WP304 / 304L / 304H / 316 / 316L / 317 / 317L / 321
/ 310 / 347 / 904L
Carbon Steel: ASTM, A234, WPB / A420, WPL3 / A420, WPL6 / MSS-SP-75, WPHY 42
/ 46 / 52 / 56 / 60 / 65 / 70
Alloy Steel: ASTM A234 WP1 / WP5 / WP9 / WP11 / WP22 / WP91
Duplex and super duplex steel: ASTM A815 UNS S31803/S32750/S32760
Special alloy steel: Monel400 and Inconel 600/800/825/C276
Pipe Fittings Metals offered for making butt-weld pipe fittings:
Monel, Nickle, Inconel, Hastalloy, Copper, Brass, Bronze, Titanium, Tantalam, Bismuth, Aluminium, High Speed Steel, Zinc, Lead Etc
Size: 1/8" NB TO 48" NB (Seamless & Welded)
Wall Thickness: Sch.5S to Sch:XXS.